PRODUCT DESCRIPTION

DK-130 Epoxy is a two-part Component and Heat cure System. 

The product is a low viscosity. 

This product is used for the trans-molding products. 

This product is also used in potting of electronic components.

 

 

PHYSICAL CHARACTERISTIC TABLE

 

(Test Temperature 25°C)

Classification

Resin

Hardener

Appearance

Clear

Light Yellow

Specific gravity

1.35

1.2

Viscosity (CPS)

11,000~13,000

1,000~2,000

Ratio(Resin/Hardener)

100

30

Working time

12 Hour

Curing time

6Hour (150~160°C)

Tensile strength

800/

Compressive strength

500/

Impact strength

4/

Hardness

80 (SHORE D)

Heat resistance

180°C

Low-temp resistance

-40°C

Moisture Absorption

0.2%

Withstanding voltage

18~20/

surface resistivity

10.14 Ω

volume resistivity

10.15 Ω

<Test Method JISK-6911 and JISK-6850>



PRODUCT HANDLING

Do NOT get on skin, in eyes, or on clothing.

Do NOT inhale mist or vapors.

Keep container tightly closed when not in use and during transportation.

Use only with adequate ventilation.

Wash after handling.

For industrial use ONLY.

Read material safety data sheet before using.

 

 

PRODUCT STORAGE

DK-130 should be stored in a cool, dry location in unopened containers at a temperature 

between 46to 82(8to 28) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. Toprevent contamination of unused material, do not return any material to its original container.

 

 

PACKING

Resin : DK-130(R) = 10KG

Hardener : DK-130(H) = 3KG