[산업] 로드(Lord) 410 acrylic adhesive - XENOY등 접착이 어려운 재질 본딩
Product Information | |
LORD?410 acrylic adhesive in combination with LORD Accelerator 19 or 19GB can be used to replace welding, brazing, riveting and other mechanical fastening methods. This adhesive system performs particularly well in low-temperature environments and applications that are subject to high impact or high peel loads.LORD 410 acrylic adhesive, when mixed with LORD Accelerator 19 or 19GB, creates an adhesive system that bonds a wide variety of prepared or unprepared metals and engineered plastics. The adhesive system is specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive.LORD 410 acrylic adhesive can be mixed with either LORD Accelerator 19 or LORD Accelerator 19GB. LORD Accelerator 19 improves the high temperature resistance of LORD 410 acrylic adhesive, and is available in off-white or black. LORD Accelerator 19GB allows precise control of the adhesive bondline thickness due to its content of glass beads. LORD Accelerator 19GB is available in off-white, red or gray. | |
Features and Benefits | |
? Versatile - bonds a wide range of unprepared metals with minimal substrate preparation; bonds diffi cult plastics such as XENOY?.?Temperature Resistant - performs at temperatures from -40 to +300°F (-40 to +149°C).? Environmentally Resistant - resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to UV exposure.? Non-Sag - remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility. | |
Typical Properties | |
Appearance |
Off-white to Tan Paste |
Viscosity, cP @ 77°F (25°C), Brookfield |
100,000-350,000 |
Density, lb/gal (kg/m3) |
9.15-9.65 (1096-1156) |
Flash Point, °F (°C), Closed Cup |
59 (15) |
Work Time, min @ 75°F (24°C) |
20-45 |
Time to Handling Strength, min @ 75°F (24°C), 50 psi Shear |
60-120 |
Cure Time, hr |
24 |
Mixed Appearance |
Color dependent on accelerator used |
Mixed Solids Content by Weight, % |
100 |
-
[산업] 아렘코 고온용 포팅,주조 소재 905 : 내습성 실리콘이며 조입자 화합물
-
[산업] 모멘티브 열전도성 구리스 YG6111 : 열이 발생하는 부품
-
[산업] 아렘코 Heat-Away 시리즈 열전도성과 전기전도성 그리스
-
[산업] 아렘코 Heat-Away 641-HT-EV 열전도성 그리스 : 히터와 공정 용기, 열 교환기
-
[산업] 아렘코 Heat-Away 641-EV 열전도성 그리스
-
[산업] 아렘코 Heat-Away 641 전기전도성,열전도성 그리스 : 히터와 공정 용기, 열 교환기, 방열판
-
[산업] 아렘코 Heat-Away 640 열전도성 그리스 : 고전력 전자 장치, 히트 파이프, 열 교환 시스템
-
[산업] 아렘코 Heat-Away 639 열전도성 그리스 : 히터 코팅
-
[산업] 아렘코 Heat-Away 638 열전도성 그리스 : 고온 안정기 저항과 알루미늄 방열판 사용
-
[산업] 아렘코 Heat-Away 637 열전도성 그리스
-
[산업] 아렘코 마운팅 접착제 Crystalbond™ 590
-
[산업] 아렘코 마운팅 접착제 Crystalbond™ 555
-
[산업] 아렘코 마운팅 접착제 Crystalbond™ 555-HMP
-
[산업] 아렘코 마운팅 접착제 Crystalbond™ 509 :
-
[산업] 아렘코(AREMCO) 고온 그라파이트 접착제 : 환원과진공, 산화에 적용