[산업] 로드(Lord) 410 acrylic adhesive - XENOY등 접착이 어려운 재질 본딩
Product Information | |
LORD?410 acrylic adhesive in combination with LORD Accelerator 19 or 19GB can be used to replace welding, brazing, riveting and other mechanical fastening methods. This adhesive system performs particularly well in low-temperature environments and applications that are subject to high impact or high peel loads.LORD 410 acrylic adhesive, when mixed with LORD Accelerator 19 or 19GB, creates an adhesive system that bonds a wide variety of prepared or unprepared metals and engineered plastics. The adhesive system is specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive.LORD 410 acrylic adhesive can be mixed with either LORD Accelerator 19 or LORD Accelerator 19GB. LORD Accelerator 19 improves the high temperature resistance of LORD 410 acrylic adhesive, and is available in off-white or black. LORD Accelerator 19GB allows precise control of the adhesive bondline thickness due to its content of glass beads. LORD Accelerator 19GB is available in off-white, red or gray. | |
Features and Benefits | |
? Versatile - bonds a wide range of unprepared metals with minimal substrate preparation; bonds diffi cult plastics such as XENOY?.?Temperature Resistant - performs at temperatures from -40 to +300°F (-40 to +149°C).? Environmentally Resistant - resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to UV exposure.? Non-Sag - remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility. | |
Typical Properties | |
Appearance |
Off-white to Tan Paste |
Viscosity, cP @ 77°F (25°C), Brookfield |
100,000-350,000 |
Density, lb/gal (kg/m3) |
9.15-9.65 (1096-1156) |
Flash Point, °F (°C), Closed Cup |
59 (15) |
Work Time, min @ 75°F (24°C) |
20-45 |
Time to Handling Strength, min @ 75°F (24°C), 50 psi Shear |
60-120 |
Cure Time, hr |
24 |
Mixed Appearance |
Color dependent on accelerator used |
Mixed Solids Content by Weight, % |
100 |
-
[전자]덴카 Solarloc 태양전지 반도체 실리콘 잉곳 가고정 접착제
-
[산업/백화]원진포리머 순간접착제 경화촉진제 LOC & LOC ACT120
-
[산업] 로드(Lord) 202 Acrylic Adhesive- 아크릴 접착제(플라스틱과 여러가지재질 접착)
-
[산업]Binders - 여러가지 바인더
-
[산업/전자]동현 방열 시트( Thermal sheet)
-
[토목.건축]독일 MKT 케미컬앵커 VM-K 345
-
[산업]록타이트 혐기성 가스켓 실란트(anerobic Gasketing sealants) 리스트
-
[토목.건축]에스티케미칼 캡술형 케미칼 앙카 chestick
-
[산업/전자]동현 전자파 흡수체 (Absorber)
-
[산업]월드케미칼 완전 수용성 자외선(UV) 흡수제
-
[산업]웨이콘 MS 폴리머 탄성 접착제 : Flex 310 M Stainless Steel
-
[건설.건축]송림기업 케미칼 앙카 접착제
-
[산업]남방CNA FLEX-A(폴리우레탄 이형제)
-
[토목.건축]에스티케미칼 주입식 케미칼 앙카 ST-300
-
[전자/산업] 삼원케미칼 구조형 열경화성 접착필름(#8110) - 진동에 대한 추종성이 우수