You cannot see this page without javascript.

대한민국 대표 접착코팅 기업
아리랑케미칼은 성실히 답변과 솔루션을 제공
하겠습니다.


여러가지 접착제와 코팅제의 모든것
조회 수 5467 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부

 

 

Product Information

LORD? 201 acrylic adhesive when cured with LORD Accelerator 4, 17 or 19 creates an adhesive system that will bond a wide variety of prepared or unprepared metals and plastics. LORD 201 acrylic adhesive in combination with the recommended accelerator replaces welding, brazing, riveting and other mechanical fastening methods.

LORD 201 acrylic adhesive can be cured with either LORD Accelerator 4, LORD Accelerator 17 or LORD Accelerator 19. LORD Accelerator 4 is a no-mix accelerator applied to the substrate before the acrylic adhesive. LORD Accelerators 17 and 19 must be mixed into the acrylic adhesive prior to application. LORD Accelerator 19 is available in off-white or black.

Features and Benefits

? Versatile - bonds a wide variety of substrates such as metals, ceramics and plastics; insensitive to minor deviations from correct mix ratio.

? Bonds Unprepared Metals - requires little or no substrate preparation.

? Self-Leveling - flows into hard-to-reach places and is excellent for bonding irregular shapes.

? Environmentally Resistant - resists dilute acids, alkalis, solvents, greases, oils and moisture; provides excellent resistance to UV exposure, salt spray and weathering.

? Temperature Resistant - performs at temperatures from -40 to +300°F (-40 to +149°C).

Typical Properties

Appearance

Off-white Liquid

Viscosity, cP @ 77°F (25°C), Brookfield HBT Spindle 5, 20 rpm

15,000-55,000

Density, lb/gal (kg/m3)

8.5-8.7 (1019-1042)

Flash Point, °F (°C), Closed Cup

66 (19)

Work Time, min @ 75°F (24°C)

5-8

Time to Handling Strength, min @ 75°F (24°C)

12-16

Cure Time, hr

24**

Mixed Appearance

Color dependent on accelerator used

 

 


List of Articles
번호 제목 글쓴이 날짜 조회 수
152 [건축] 테라코코리아 핸디코트 결로방지 퍼티 file 아리랑 2023.01.03 2
151 [건축] 우레탄계 건타입 DH-폼 : 샤시, 문틈,틈새 충진, 배관 파이프 file 아리랑 2022.12.13 112
150 [산업] 불포화폴리에스테르 수지 - 일반 적층용 수지, 그레이팅용 : KD 131GT, KD 132GT / 내후성과 투명성 우수 file 아리랑 2022.12.12 99
149 [산업] 불포화폴리에스테르 수지 - 일반 적층용 수지, 정화조 : KD 100, KD 101, KD 109 file 아리랑 2022.12.12 87
148 [산업] 불포화폴리에스테르 수지 - 일반 적층용 수지, 어선, 선박, 보트 : KD 310, KD 311, KD 312 file 아리랑 2022.12.12 101
147 [산업] 불포화폴리에스테르 수지 - 일반 적층용 수지, 욕조,정화조 : KD 102, KD 106, KD 107, KD 108, KD 110, KD 115, KD 120, KD 150 file 아리랑 2022.12.12 75
146 [산업] UPR 블포화폴리에스터 : SR825 L/H, SR825LV/HV, SR819SE, SR841L/LV, SR870SE-A, SR825GT,SR870SEGT - 내식성, 난연성, 그레이팅, 탱크 라이닝 아리랑 2022.12.12 75
145 [산업] UPR 블포화폴리에스터 : R280, R550, R456, R585 - 내열성, 내약품성, 내수성, 탱크 라이닝 적용 file 아리랑 2022.12.12 80
144 [전자] 초 고열전도성 갭 충진제 SilCool TIA2101GF : 열방사, 열발산, 전기절연 file 아리랑 2022.12.08 106
143 [산업] 아렘코 고온용 포팅,주조 소재 646-N : 고온 전기 저항 히터, 물과 배합사용 아리랑 2022.02.23 295
142 [산업] 아렘코 고온용 포팅,주조 소재 505-N,586, 900-N : 고밀도, 고강도, 캐스터블 & 포팅,몰딩 컴파운드 file 아리랑 2022.02.23 345
141 [산업] 아렘코 고온용 포팅,주조 소재 673,673N : 열전도성 실리콘 카바이드(SiC) 히터 제조 file 아리랑 2022.02.23 327
140 [산업] 아렘코 고온용 포팅,주조 소재 905,905FG : 내습성 실리콘이며 조입자 화합물 file 아리랑 2022.02.23 308
139 [산업] 아렘코 고온용 포팅,주조 소재 645-N : 고온 세라믹 포팅 화합물 file 아리랑 2022.02.23 273
138 [산업] 아렘코 고온용 포팅,주조 소재 584 : 이액형 속경화 포팅및 주조 화합물 file 아리랑 2022.02.23 222
목록
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 ... 13 Next
/ 13
© k2s0o1d6e0s8i2g7n. ALL RIGHTS RESERVED.