[산업/전자]렌즈 접착제(Lens Bond) Type EK-93, 에폭시 구조용 접착제
Lens Bond Type EK-93 is a non-toxic 100% solids epoxy system that is thixotropic and will not drip, sag, or shrink. Lens Bond Type EK-93 is an excellent structural adhesive that will bond virtually all like and unlike substrates with equal strength. It consists of a two-part formulation that is mixed in a 50/50 ratio. It has been tested and has been found to be resistant to solvents, oils and humid environments.
12680 |
Lens Bond Type EK-93 |
4oz bottle |
||
12681 |
Lens Bond Type EK-93 |
16oz bottle |
||
12682 |
Lens Bond Type EK-93 |
90lbs |
Approximate Curing Times
Pre-Cure | Full-Cure |
---|---|
Due to the fact that the viscosity is very high, once applied, the substrates are held in place immediately and pre-curing is not necessary. | At 50/50 ratio- 8 hours at 70캟 Pot life at 50/50 ratio- 90 minutes at 70캟 (ovens or infrared lamps may be used to accelerate cure speed) |
Mixing Instructions
Approximately equal amount of "A "and "B" (by volume). Variations as high as 20% will not materially affect bond strength. When desirable, one part of "A "to 2 parts of "B "may be used to increase flexibility.
Specifications
Viscosity........................>25,000 cps. Refractive Index (full-cured)....n/a opaque Operational Temperature Range....-20도 100도 Water Absorbtion.................<2% (after 7 days @ 22캜) Tensile Shear....................6800 psi Shrinkage on Cure................<.07% Specific Gravity.................Part A=1.3; Part B=1.7; combined 1.45 at 1:1 ratio Dielectric Strenth...............440 volts per mil Ratio Elongation.................7% Shore D. Hardness................>95 Glass Transition (Tg)............100캜 to 115캜 Shipping and Storage.............Type EK-93 needs no special handling or storage. It should, however, be kept away from intense light and elevated temperatures. Shelf Life.......................18 months from date of manufacture at room temperature. Size.............................4 oz, 16 oz, 90 lbs
Suggested Applications
- As a structural adhesive, sealant, or a filler for most substrates.
- Bonding of glass to metal, metal to metal, various composite materials to glass or metal, ceramics, and ferromagnets.
-
[산업]에폰스화학 상온경화형 에폭시 접착제 : AR-16, AR-13, AR-17
-
[산업] STYCAST 2651-40FR -> STYCAST ES 2505 몰딩,포팅
-
[산업/전자] ENSURE CP-7412SR 일액형 에폭시 접착제
-
[산업/전자] ENFORCE CP-7494C : 플라스틱 접착용 flexible 이액형 epoxy 접착제
-
[산업]에폰스화학공업 전기,전자용, 적층소재, 성형재, 바니쉬,함침
-
[산업] 에폰스화학공업 상온 경화용 접착제
-
[산업,건설]에폰스화학공업 BC-302 아스팔트,콭크리트,활주로용,활주로 배관매립용 에폭시
-
[산업/전자]일액형 열경화 에폭시 접착제(7405B)
-
[산업/전자]밀본드 시스템 (TYPE Milbond Adhesive System), MIL-A-48611
-
[산업/전자]렌즈 접착제(Lens Bond) Type EK-93, 에폭시 구조용 접착제
-
[산업/전자]렌즈접착제 Lens Bond TYPE DC-90 UV 경화후 상온 후 경화
-
[산업/전자] 렌즈접착제 Lens Bond Type RD3-74
-
[산업/전자]렌즈접착제 Lens Bond TYPE M-65, MIL-A-3920
-
[산업/전자]렌즈접착제 Lens Bond TYPE M-62, MIL-A-3920.
-
[산업/전자]렌즈접착제 Lens Bond Type C-59, MIL-A-392
-
[산업,전자]밀본드(mil bond) 1292 elastomeric-epoxy 접착제
-
[산업]하이솔(Hysol) 흑색,열경화 에폭시 몰딩제,언더필 UF3800
-
[산업]몰리테크 열전도성 에폭시 TR 1000,TR 2000,TR 4000, TR 5000
-
[산업/광학/접착/코팅] AREMCO-BOND 아렘코 전체 제품 다보기
-
[산업/광학] 아렘코 AREMCO-BOND EB-112 저점도 에폭시 접착제